Used Equipment

$47,500

4Bale Tractor Pull EZ Ration Processor with Scales and several other options

This is a nice 4 Bale Tractor Pull model with the 2 Scale System (that weighs each side independently), Stake Pockets, HMW (under both floor chains), and Super Single Wheels.
The customer said this Tractor Pulled EZ Ration Processor has been a great unit, but he has expanded and purchased more county, now he needs more mobility to cover a bigger feed circle. He currently has one of our new Truck Mounted Computer Controlled Hydraulic Drive EZ Ration Processor on order.

Like all EZ Ration Processors this Tractor Pulled EZ Ration Processor’s floors are controlled independently to allow the operator to blend feed sources in any desired ratio to create more cost efficient, nutritionally balanced blends. This customer was actually blending in some silage with this unit.

If you have been looking for a good used EZ Ration Processor, don’t let this one get away. Give us a call 800 242 9599 and we will get you hooked up.

$60,000

6-Bale Truck Mounted EZ Ration Processor on An Army 6×6

A 6-bale EZ Ration Processor mounted on a 6×6 Army truck that looks to have been well maintained.

This is a 2020 model EZ Ration Processor with the newer round knife drums. It also has the bigger gearboxes on the floor drives. There is an air activated discharge hood and the truck looks to have low miles and hours, with nice big super singles on it. It is a 1990 BMY Harsco, M923A2 900 Series 5 Ton and they have some filters for the truck as well as new Knives for the EZ Ration Processor that will go with it.

It is not currently set up to stack 3x4s, but it already has the bigger gearboxes and beefed-up frame support. All you need is just the Knife hood extensions that we can fix you up with. Turning it into a 12-bale unit when feeding 3x4s. If this EZ Ration Processor fits the bill for you give us a call and we will get you hooked up.

$30,000

2-Bale Pickup Pulled EZ Ration Processor Honda Powered

Since we are coming out with our bigger 4-Bale Pickup Pull EZ Ration Processor we have a few of the 2-Bale EZ Ration Processor customer that loved the concept of processing and blending for a considerably more cost effective and better balance ration. Plus, the mobility of being able to pull it with a pickup basically just like pulling a horse trailer. However, they just wanted more volume and that is the case here. Since we are coming out with the 4-Bale Pickup Pull this customer is looking to upgrade to one of them and is making this one available for someone else.

He said it only has 27 hours on it now and it has worked great for him. If you have never seen one in action, check out the video on this web page under the video tab, or give us a call and we can email you a video of this exact unit in action that the customer sent us. 800 242 9599

Sold

$87,500

4- Bale Computer Controlled Hydraulic drive EZ Ration Processor with Grain Attachment and Scales sold with a warranty

This 2005 4X4 truck is the newer International body style with one of our New Computer Controlled Hydraulic Dive EZ Ration Processors mounted on it. This was one of the trucks featured in the RFD TV Cattleman to Cattleman show filmed at our ranch. It can be seen in action in the top video on the video page.

We used this unit on our ranch to feed our cows and for testing and development purposes. It is kind of like the Old Johnny Cash song: it is a 2019, 20, 21, 22, & 23. We have tested different items on it over the last few years. It has the latest style components and programing in it as a result. You will not be able to have it till we finish up this feeding season and have a chance to service it and go through everything and also have our Mechanic check out the truck and service it as well.

The 2005 International 7400, 4X4 truck has the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. The Computer Controlled Hydraulic driven EZ Ration Processor on it is a 4 Bale unit, with the 3-round drum, knife configuration, and with nearly all the options available.

It has a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System, (right floor, left floor, and the grain attachment each have their own scale system and monitor). Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, as well as the speed of the auger in the gain bin, all independently, allowing the producer to create any desired blend of the three different feed sources. This EZ Ration Processor, new (including the same used truck) with these options, would sale for over $130,000.

It will come with a 3-month warranty (parts on EZ Ration Processor only) These units we use at our ranch are always great deals. They are about the only used unit you can buy with a warranty. You can click on the small picture to enlarge it and we will have additional pictures of this unit coming soon. We also have financing available. Call 800 242 9599 or email us at ezration@ezration.com

Sold

$45,000

4Bale Tractor Pull EZ Ration Processor with the Grain Attachment

This is a 4-Bale Tractor Pull EZ Ration Processor with a Grain Attachment, Manual Discharge Hood, Dual Wheels, Stake Pockets, and the Knife Hood Extension for stacking 3x4s. (You can load and feed 8 midsized 3×4 bale with it). It has the in-cab style control system and the newer style, very popular, round knife drums. They have just put all new hydraulic hoses and a new wiring harness on it. It also comes with 2 new extra gearboxes and new rear floor chain idler sprockets.

The customer has upgraded to one of our 6-bale Tractor pull units with all the same specs as this one. The customer said they really liked it and things have gone so good with it they now need more volume. So, they are making this one available for someone else that needs to improve their cattle feeding operation this fall. If this fits the bill for you give us call and we will get you hooked up. 800 242 9599

Sold

$28,000

2-Bale Honda Powered Pickup Pulled EZ Ration Processor

Here you go everyone that has been asking for a used Pickup Pull EZ Ration Processor. They are self-contained, self-powered and extremely mobile. All you need is a pickup with a gooseneck ball in the back and you are good to go. The customer said he got along great with it and really appreciated being able to process and combine roughages to create cost saving blends, but decided he needed to move up to one of our tuck mounted EZ Ration Processor to carry more bales. Now that he has his new truck mounted EZ Ration Processor he is freeing this one up to help someone else feed their cows cheaper. If you have never seen one in action, check out the video on this web page under the video tab. This Pickup Pull EZ Ration Processor is verily a year old. If you are needing it give us a call and we will get you hooked up. 800 242 9599

Sold

$24,500

6-Bale Tractor Pull EZ Ration Processor

This is a very clean older model 6-Bale Tractor Pull EZ Ration Processor that is priced right. On this EZ Ration Processor model we varied the floor speeds independently with the flow controls that are mounted on the front of the knife hood. The owner said they are fully functional and he has just put new knives on the knife drums. This unit has the old-style knife hood extension for stacking 3x4s if so desired. The owner purchased it a while back and then did not end up with the ranching property he thought he was going to get, so wanted to make it available for someone else. Pretty hard to find older units in this good of shape and at this price. There will probably not be another EZ Ration Processor this old in this good of shape and selling this cheap. If you have been wanting to incorporate all the feed cost savings and nutritional benefits that an EZ Ration Processors provides in your ranching operations, and have been looking for a good buy on an older unit, do not let this one slip by you. 

Sold

$30,000

Pickup Pulled EZ Ration prototype/demo unit

This is one of our Pickup Pulled EZ Ration prototype/demo units. We have fed with it for a couple months now. It will be gone through and refurbish and sold at a discount with a 3-month warranty.

Just FYI, if you don’t plan on using it till this fall the warranty period will not start until you start using it.

This all-self-contained Pickup Pull EZ Ration Processor has some of the latest designed items that we will be using on our Pickup Pull units going forward and you can get them at a discounted price. If you would like to be on the list for this unit, give us a call 800 242 9599 or email us at ezration@ezration.com

It will not be available for about another month. We will start at the top of the list and go down it when we have it priced and we know for sure when it will be available.

Call or email soon to be on the top of the list and have first shot at it. All you need is a pickup with a gooseneck ball in the back and you can feed your cows a processed blended, nutritionally balanced, cost-efficient, roughage ration. There is probably no better or cheaper way to feed cows.

Sold

$80,000

4-Bale Truck Mounted EZ Ration Processor with a Grain Attachment and Scales

If you have been looking for a sharp used truck mounted EZ Ration Processor here you go. It has a grain attachment, the complete 3 scale system, air discharge hood, all on a 4×4 International truck with a new motor.

This customer is upgrading to one of our 6-bale Hydraulic Drive Computer Controlled Truck Mounted EZ Ration Processors, so this one will be available as soon as they are done feeding with it. They really liked this unit, but the herd has grown and they need one of our 6- Bale units now. The EZ Ration Processor looks to be in great shape and they have just put a new motor in the truck and they have all the new motor paperwork to go with it.

I am sure I don’t need to keep mentioning it, but I do still get asked if this one has the split floors that can be controlled individually to create different cost efficient, nutritionally balanced, roughage blends. The answer is yes, we have never built an EZ Ration Processor that doesn’t have the split floor controls and we never will. The split floors are a huge deal especially now with high hay prices. The patented ability to blend in some cheaper filler with higher quality hay, in any desired ratio, can significantly reduce feed cost, plus the cows usually do better. Better and cheaper is always a good combination.

This unit also has the grain attachment with the patented ability to adjust the auger speed independently which allows for even more options to create cost efficient rations. The blend can also be changed on the go for different classes of livestock. You can feed a growing lot ration to your weaned calves and replacement heifer and totally change it in the next pen or pasture for the running aged cows. You can even take feed sources out of the blend from one pen or pasture to the next.

This unit also has the 3-scale system that lets you weigh and keep track of how much of each feed source you are blending in. The left floor, right floor, and the grain attachment all have their own scale system and monitor.

Used units are a pretty rare item these days and especially one in this good of shape and on a truck with a new motor in it. If you have been looking for a good used EZ Ration Processor don’t let this one, get away.

Give us a call at: 800 242 9599 – or email us at: ezration@ezration.com 

Sold

$54,000

4-Bale Truck Mounted EZ Ration Processor

If you have been looking for a deal on an EZ Ration Processor ready to go- then look no further.

The customer said he loved this unit. However, things changed on the ranch and it was not being used so he decided to make someone a deal on it that could use it. 

It is the very popular newer 3 round drum model with an air activated discharge hood, and the 2 scales system that weighs each floor individually, which is great for creating cost effective nutritionally balanced blends. As an added bonus it also has a camera system that lets you view what is going on behind you, both on the bed and on the ground.

This is a 4×4 truck but the transfer case went out and rather that replace it the customer just put an underdrive drop box in it which was more cost effective. So, the truck can still be slowed down to feed with but there is not a drive system to the front axle now.

If you think you can get along without 4×4 on your ranch this is probably the best deal you will find on a newer style 4 Bale EZ Ration Processor with Scales. 

Give us a call at: 800 242 9599 – or email us at: ezration@ezration.com 

Sold

$62,000

6Bale Tractor Pull EZ Ration Processor with the Grain Attachment and Scales

As you can see this is a nearly new, verily used, 6 Bale Tractor Pull EZ Ration Processor with the Grain Attachment and the Discharge Hood. Plus, the 3 Scale System. Like all EZ Ration Processors, it has the patented ability to change the amount of any of the three feed sources by varying the speed of the floor chains or the auger with the controls in the cab of the tractor. Also, the 3 scale monitors correlate with each of the two different floor chains and the grain bin. (each feed source has its own scale system and monitor). This scales system allows the producer to create rations more efficiently and effectively and also change the blend on the go to feed different rations to different classes of livestock. Such as: first calf heifers, second calf heifers, old cows, running age cows, bulls, culls, even horses. Changing the blend on the go allows the producer to provide the nutritionally correct blend for each class of livestock and simultaneously save 30, 40, 50 cents a head a day. The customer said he loved this unit, just life changed shortly after he got it. He lost some lease ground so just didn’t purchase any more yearling and has not used it for the last 2 or 3 years. He said it is a great unit and should be doing someone some good, so he decided to list it. If you are one of the many having to deal with drought and high hay prices here you go. EZ Ration Processors can typically cut feed cost from 30%, 40% to even over 50%.

Call 800 242 9599 ASAP for more information.

Sold

$79,900

6-Bale Hydraulic Drive EZ Ration Processor on a 4×4 International Truck

This is our one of our Hydraulic Drive EZ Ration Processors The truck is a nice 4X4 2002 International truck with the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. 

The EZ Ration Processor on it is a 6 Bale unit, with the two speed, 3 round drum, knife configuration. It also has the knife hood extension allowing you to stack the 3x4s turning it in to a 12-bale unit when feeding 3x4s. It has been up graded with the larger gearboxes for stacking the 3x4s. It also has the Air Activated Discharge Hood.

Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, independently, allowing the producer to create any desired blend of the two different feed sources.

 This EZ Ration Processor, new (including the same used truck) with these options, would currently sale for over $105,000. This units would probably have the equivalent of 4 feeding season on it.

We have some Great financing available for this unit too. (for qualified buyers)

Call: 800 242 9599 – or email us at: ezration@ezration.com   (Click on the small picture to the right to enlarge and access additional pictures of this unit)

Delivery available

Sold

$55,000

4 Bale Conventional Driven EZ Ration Processor with Grain on 6×6 Int Truck

This is one of our previous models. It is a Conventional Drive Four Bale EZ Ration Processors. It will have the 4 square knife drums.  It has a Grain Attachment with an Air Activated Lid. It also has the Air Activated Discharge hood, the in-Cab Controls, and the complete 3 Scale System. The left floor, right floor and grain bin each have their own scales and monitors. This allows the producer to create considerably more exact blends and it significantly increases feeding efficiency.

 This EZ Ration Processor is only 10 years old.   It is mounted on a 1992, 6×6 International truck with the DT466 Motor and the MT653 Allison Transmission. The MT653 is the Allison model transmission with the extra low gear everyone loves to have in a feed truck. The customer said it has worked great for him and it is ready to go. It is hard to find these older style International 6×6 trucks with the MT653 Allison transmission in this good of shape.

 Do not miss out on this one, call or email us soon at: 800 242 9599 or ezration@ezration.com 

I am sure it will not be available long.

Sold

$49,950

6Bale Tractor Pull EZ Ration Processor

This is a nice unit only little over 2 years old. It has a tandem axle with suspension and the 8 in knife hood extension to stack 3x4s bales, which turns it into a 12-bale unit when feeding the 3x4x8 bales. We have a dealership that has been adding these aftermarket tandem axles with a spring suspension system and everyone has got along good with them. This unit also has the heavier duty floor drive gearboxes and a manual discharge hood for feeding in the wind. This customer has one of our new Computer Controlled Hydraulic Truck Mounted EZ Ration Processors on order. He said he not letting this one go until the new Truck Mounted EZ Ration Processor get there. However, he said if we can get a deal put together, the truck that delivers his new Truck Mounted EZ Ration Processor could load this one up and deliver it to you. We are just a few weeks away from his new Truck Mounted unit being ready to deliver, so call soon. It is priced right. I think a new one like this with the current steel surcharge price would be nearly $25,000.00 more. Call 800 242 9599 for more information

Sold

$68,900

4 Bale Conventional Driven EZ Ration Processor with Grain on 4×4 Int Truck

This is a nice conventional drive Four Bale EZ Ration Processor with the Grain attachment with an air activated lid, the air activated Discharge hood, the complete 3 Scale system (left floor, right floor and grain bin) all on a 4×4 International Truck with a MT653 Allison Transmission. This EZ Ration Processor is only 4 years old. The customer said it has worked great for him and is ready to go. This is a really good price on truck and the pretty loaded up with options, EZ Ration Processor mounted on it. It is hard to find these older style International 4×4 trucks with the old MT653 Allison transmission that everyone loved in this good of shape. Do not miss out on this one, call or email us soon. 800 242 9599 or ezration@ezration.com

 

Sold

$59,900

EZ Ration Processor with the Grain Attachment

CALL SOON it will probably not last long. With everything happening in the world today we are offering our used truck mounted Hydraulic Driven EZ Ration Processor and the 4×4 Int. Truck it is mounted on, at what I believe is the lowest price we have offered one in over 10 years. This is a really good deal. This is a 3 year old, Hydraulic Driven Model, EZ Ration Processor with the Grain Attachment and the Air Activated Grain Lid, the Air Activated Discharge Hood (which will be brand new), and the 3 Scale System. Like all EZ Ration Processors, it has the patented ability to change the amount of any of the three feed sources by varying the speed of the floor chains or the auger with the controls in the cab. Also, the 3 scale monitors correlate with each of the two different floor chains and the grain bin. (each feed source has its own scale system and monitor) The EZ Ration Processor will be gone through and sold with new knives and a new discharge hood as well as a with a 3-month warranty, just in case we miss anything. (parts only ordered through us). The 2001 4×4 International truck with the DT466 motor and New World Alison automatic transmission, will be serviced and gone over by our mechanic and sold in good faith to be good to go. We did just put a new ECM in the truck a few months back. As you can see it is in its working clothes as we are currently using it every day to feed with. It will not be available till the middle of May probably at the earliest. Call ASAP if you are interested in it. We also have some great deals on a limited number of new EZ Ration Processors for a very limited time. If you are holding cattle for a better market and need to feed them as efficiently as possible, or if you are just looking to feed more efficiently in general, do not miss this opportunity.

Sold

$75,000

4Bale, conventional drive, EZ Ration Processor

 This is a nice, nearly new, 4Bale, conventional drive, EZ Ration Processor with a Grain Attachment, with the complete three set Scale system, Air activated Discharge Hood, Air activated Grain Lid, Beater Hood Extension (not installed in Pictures) on a 4×4, relatively low mile, International truck, with the right specs to make it a great feed truck. The owner said thing changed and he lost some leases after he purchased the truck and since he is not able to use it like he planned he thought he would make it available for someone else to reap the feed efficiency benefits this truck will provide.

Sold

$75,000

Hydraulic drive EZ Ration Processor

This 2004 4X4 truck is the newer International body style with the New World Allison transmission and it has one of our New Hydraulic Dive EZ Ration Processors mounted on it. We used this unit on our ranch to feed our cows and for testing and development purposes. This new style International Truck and our Hydraulic drive EZ Ration Processor have both been in big demand and this is the first used one we have had to offer. The 2004 International 7400, 4X4 truck has the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. The Hydraulic driven EZ Ration Processor on it is a 4 Bale unit, with the new two speed, 3 round drum, knife configuration, and with nearly all the options available. It has a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System, (right floor, left floor, and the grain attachment each have their own scale system and monitor). Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, as well as the speed of the auger in the gain bin, all independently, allowing the producer to create any desired blend of the three different feed sources. This EZ Ration Processor, new (including the same used truck) with these options, would sale for over $99,000. This units would probably have the equivalent of one and a half feeding season on it (the unit was built nearly two years ago now) and it will come with a 3 month warranty (parts on EZ Ration Processor only) These units we use at our ranch are always great deals. They are about the only used unit you can buy with a warranty. You can click on the small picture to enlarge it and we will have additional pictures of this unit coming soon. We also have financing available. Call 800 242 9599 or email us at ezration@ezration.com to get on the list. (or for more information) As soon as this trucks replacement is ready we will start at the top of the list and go down until it is sold

Sold

$66,500

4 Bale unit, with the new two speed, 3 round drum

 This is our one of our new style Hydraulic drive EZ Ration Processors that we used on our ranch for testing and development purposes. The truck is a nice 4X4 2001 International truck with the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. The EZ Ration Processor on it is a 4 Bale unit, with the new two speed, 3 round drum, knife configuration, and with nearly all the options available. It has a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System, (right floor, left floor, and the grain attachment each have their own scale system and monitor). Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, as well as the speed of the auger in the gain bin, all independently, allowing the producer to create any desired blend of the three different feed sources. This EZ Ration Processor, new (including the same used truck) with these options, would sale for over $92,000. This units would probably have the equivalent of one feeding season on it (the unit was built nearly two years ago now) and it will come with a 3 month warranty (parts on EZ Ration Processor only) we are pricing it with a nearly 30% discount. We also have financing available. These units we use at our ranch are always great deals. I think we are currently nearly 3 months out on new orders. (Click on the small picture to enlarge and access additional pictures of this unit) $ 66,500.00

Sold

$62,500

 4 Bale unit, with the new 3 round beater knife configuration

 This is our EZ Ration Processor that we are currently feeding with on our ranch. This is a nice 4X4 97 International truck with the DT466 motor and the 653 Allison Automatic transmission, the Allison transmission with the extra low gear that is really nice to feed with, and a Hot shift PTO. — The EZ Ration Processor on it is a 4 Bale unit, with the new 3 round beater knife configuration, with a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System. This EZ Ration Processor, new (including the used truck) with these options, would sale for over $86,000. — These units are always a good deal–and come with a 3 month warranty (parts on EZ Ration Processor only) — We will make a list of interested customers and just start at the top of the list (after we determine the price and how soon it will be available) and go down the list until the unit is sold. If you want to be on the list for this unit please call 800 242 9599 — We will try to have it determined who is getting it before the end of April. That will allow everyone on the list below whoever gets this unit to still place an order and beat the price increase coming May 1st.

Sold

$63,000

4 Bale Unit with a Grain Attachment

 This is our demo unit that was used on our ranch during the 2011 – 2012 feeding season. In fact we just got done feeding with it when we took this picture. Note the chains still on the front tires. This truck is great in the mud and snow. The Truck is a 96 international with the DT466 motor and the 643 Allison Automatic with a Hot shift PTO (click on the picture to enlarge) — The EZ Ration Processor is a 4 Bale Unit with a Grain Attachment – Air Activated Grain Lid – Air Activated Discharge Hood – and the Complete 3 monitor Scale System (Grain attachment, right floor, and left floor) These units are always a good deal–and come with a 3 month warranty (parts on EZ Ration Processor only) The warranty period starts when you start using the truck — Not when it is sold — Call 800 242 9599 or email us at ezration@ezration.com – Leave a message if it is after hours. We will be done feeding with it around May 15th and it will be serviced and delivered shortly there after.

Sold

$65,000

4 Bale Unit with a Grain Attachment

 This is a really nice 4 Bale EZ Ration Processor with a Grain Attachment and nearly all the other available options. Such as: Air Activated Discharge Hood, The Independent Three Scale system, Air Activated Grain Lid, and Stake Pockets. The EZ Ration Processor would be 5 to 6 years old and like all EZ Ration Processor we have ever made, it has the ability to control the left floor chain separate from the right floor chain to blend different roughage in any desired ratio. The grain auger is also independently controlled to vary the amount of grain or cake dispensed. It is mounted on a 2000 International 4×4 truck with the DT466 motor and the MT643 Allison transmission. The customer bought it used and did some upgrading on the EZ Ration Processor and they said they also put right around $15,000 into the truck getting everything in great condition down to even any seal that was leaking or gauge fixed that needed it. They say the truck is in great working condition and is currently being used every day. However, this truck has the MT643 Allison transmission, which does not have the extra low creep gear in it. They feed primarily in bunks and would like to get a truck with a lower gear and they know now is the best time to sale a feed truck. My understanding is it would be ready to go to work for you right away. Call us if you are interested and we will hook you up with the needed phone numbers to get something going on it.

Give us a call at 1-800-242-9599

We have customers that upgrade from time to time; therefore, used units can be available for a short period.

Also, we have at least one fully loaded Demo/Used Truck Mounted Unit available at the end of each feeding season at a really great price!

If you would like to be notified when a used unit comes available, call 800-242-9599 or email ezration@ezration.com with your name and number, and we will add you to the list to be notified.